2008 Honda Odyssey
Mileage
184,997
Service Date
12/1/2020
Services Performed
- Automatic transmission DRAIN AND FILL
- DRILL OUT 3 BOLTS
- INSPECT FOR LEAK & CLEAN RUST & CORROSION FROM RIM SEALING AREA BOTH FT TIRES AND RT REAR
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection.
- PCV VALVE – Remove & Replace – All Applicable Models
- PREFORM FUEL INDUCTION SERVICE
- Repair Muffler Shield
- Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center steering wheel. May require additional labor time & parts.
- ROTATE TIRES
- SHOCK ABSORBER – Remove & Replace – Both
- SPARK PLUGS – Remove & Replace – All
- STABILIZER BAR CONTROL LINK – Remove & Replace – Both
- STRUT ASSEMBLY – Removal & Installation – Both – [DOES NOT include disassemble or alignment.]
- THREE TIRE ARE LOW. BOTH FRONT TIRES ARE LOW AND REAR RIGHT TIRE IS LOW. TPMS LIGHT IS ON. TRANS FLUID IS COLORED. STEERING WHEEL A BIT OFFSET. RECOMMEND MAINTENANCE. MAY NEED AXLE SHAFT IN THE FUTURE IF BINDING.
- THROTTLE BODY CLEANING
DANIIL R. gave our service a 5 star review on 12/1/2020
