2010 Ford Fusion
Mileage
159,205
Service Date
9/8/2020
Services Performed
- Check and inspect suspension components: ball joints, tie rods, idler arms, springs, bushings, and check for accident damage. FRONT LOWER FRONT MOST CONTROL ARMS ARE BAD. FRONT SWAY BAR LINKS HAVE PLAY. FRONT BRAKES HAVE ABOUT 15% LIFE AND ARE GROOVED AND PULSATING. REAR BRAKES ARE ALSO LOW.
- Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
- CONTROL ARM – Remove & Replace – Lower,Left,Front – [DOES NOT include alignment.]
- CONTROL ARM – Remove & Replace – Lower,Right,Front – [DOES NOT include alignment.]
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection.
- Remove Seized Caliper Slide Pins & Lube
- Replace front brake pad linings and rotors. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Road test vehicle.
- Replace rear brake pad linings and rotors. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Road test vehicle.
- Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center steering wheel. May require additional labor time & parts.
- STABILIZER BAR CONTROL LINK – Remove & Replace – Both
DAVID V. gave our service a 5 star review on 9/9/2020
